|
B&G MACHINE & WELDING WILL MEASURE THE
PUMPING UNITS PER YOUR REQUEST AND INSTALL A CUSTOM CLAMP WITH
NO DOWN TIME FOR THE RIG CREWS; SAVING YOUR COMPANY TIME AND
MONEY.
OBTAINING THE
HOBBLE CLAMP
- Measure
the thickness of the bottom flange of the walking beam, on
both sides, 6” to 12” behind the horse head or throat
pin.
- Then
measure the width of the bottom flange at the same location.
- Furnish
this information (i.e., ¾” x 10”, 1” x 14”, etc.)
together with the brand and type of pumping unit, to B&G
Machine & Welding, which will manufacture a Hobble Clamp
for this particular unit.
|
