Hobble
-Clamp
Safety System

California Contractors License # 806616 Patented & Manufactured by B&G Machine & Welding 

Photos
hobble-clamp.com
 

Home • Photos • Reasons • How To • Clients • Contact B&G
     
Click Photos
to Enlarge
 (Back-button to return)
Description
Hobble-Clamp Safety System eliminates this activity
S-01.jpg (23571 bytes) First problem without the positive lock out system is when the head is down and weights are up and the brake should fail.  The walking beam will come in contact with the rig causing; Possible life threatening and or physical injury.
S-02.jpg (33047 bytes) If the brake fails this is approximately where the walking beam will stop.
The clamp must be 6” to 12” behind throat pin attachment, or no more than 12” behind the horse head.  The clamp must be secure on the beam.

The adjustable base anchor has two places it can be used.  This is the preferred location.
This is the secondary location for the adjustable base anchor.
The lifting pole is used to fit lift the rope not the sling.

Pull the sling up to the hook with the rope, guide the sling on to the hook with the pole

Correct installation.

All equipment must have visual inspection before each use.
Correct installation.

All equipment must have visual inspection before each use.
TOP
 

 © 2001-2008   ...   B&G Machine & Welding   ...   Bakersfield, California (USA)   ...   IE:800x600
10MAX.com Websites - an Anetstore.com and Magic4Us.com affiliate